What is Volcanic Rocks Crusher

Volcanic Rocks roller crusher has achieved a breakthrough in the equipment manufacture of aggregate production. Volcanic Rocks roller crusher ,also named as double roller crusher or roller sand making machine, runs by driving two motors and two pairs of rollers to grind the material fed. Double roller crusher can operate crushing material less than 80mm as well as the finished product size 50 mesh-20mm.

Volcanic rock is a common ore, which has the characteristics of high hardness, high density and high wear resistance, so it is widely used in industrial production. For the sand making industry, the processing of volcanic rock is an important part. And roll crusher is a commonly used crushing equipment, which can crush volcanic rock and other hard ores with high efficiency, thus providing important technical support for sand making industry.

Reasons for choosing us

1. Compared with hammer sand making machine, Volcanic Rocks roller crusher does not need to replace wearing parts.

2. The finished product features pretty shape, well gradation, low over-crushing rate and high output.

3. Volcanic Rocks crusher is superior to hammer crusher and impact crusher, and the average service life ofitsroller sleeve is more than 2 years.

4. Roller skin contains high content of chromium, manganese and other rare metal materials. Adjustable discharge size.

Machine-testing Video

It is suitable for crushing sticky stone material into medium size. Roller crusher utilizes two rollers rotating in opposite direction to crush the material, which consists of motor, bracket, fixed rollers, movable rollers and springs. Most of its roller surfaces are glossy, and the bearings of the movable rollers can be moved along the machine frame and held against it by springs. Therefore, When a particularly hard object accidentally drops into the machine, the bearing can be moved out of the way to expel it. Furthermore, before the machine runs, the gap between the two rolls should be adjusted with shims to ensure the crushing size.

Volcanic Rocks crusher working principle

The Volcanic Rocks  roller crusher operates through rollers. The volcanic rocks, put into the machine through the inlet, are crushed by the squeezing between the rollers. The discharge size can be controlled by adjusting the gap between the two rollers. If the gap becomes larger, the discharged size becomes larger. While the gap becomes smaller by compressing spring, the discharge size also becomes smaller.

Product category

Volcanic Rocks crusher is divided into several kinds: Spring fine crushing sand making machine, cardan shaft drive roller crusher, hydraulic fine crushing sand making machine.You can choose the machine according to your budget and the facts.

Product Model

There are small, medium and large Volcanic Rocks crusher.

1. Small stone roller crusher: 250×250，400×250，400×400，610×400

Production capacity: 2-12 tph

2. Medium stone roller crusher: 750×500，800×600，800×800，1000×800

Production capacity: 20-50 tph

3. Large stone roller crusher: 1200×800，1200×1000，1500×800，1500×1000，1500×1200，1800×1200，2000×1000 or larger.

Production capacity: 50-400 tph

HSM machines features different configurations. The sales manager can recommend the proper product to the customers according to their facts.