Huashengming mobile crushers redefine mobile crushing scenarios through three core technological pillars: “dual-stage anti-clogging crushing,” “intelligent adaptive control,” and “ultra-wear-resistant design.”What are the models of Huashengming mobile crusher?

Mobile Crushe

1. Mobile Two-Stage Crusher (Wet Material Specialized)

Core Models:
SCF600×600, SCF1000×800 (20–180 tons/hour)
Model 1412 Two-Stage Crusher (Coal Mine Specialized, 200 tons/hour)

Technical Features:
Dual-rotor serial crushing: Primary coarse crushing (feed ≤600mm), secondary fine crushing to ≤3mm. Screenless design completely eliminates clogging issues with high-moisture materials.
Energy-efficient: Reduces energy consumption by 15–30% through “material-on-material” collision effect. 80% of output particles ≤2mm.
Maintenance-friendly: Hydraulic quick-opening inspection door design cuts maintenance time by 70%.

Applications:
High-moisture construction waste (moisture content ≤15%), coal gangue, clay-like materials.

2. Mobile Double-Tooth Roller Crusher (Hard Rock/Rebar Processing)

Core Models:
2PGC600×900 (120 t/h)
2PGY Series (e.g., 2PGY800×800, 2PGY1500×1000, 80–400 t/h)

Technical Features:
Hydraulic Precision Adjustment: Roll gap adjustable 1–50mm, controllable discharge size 1–50mm, ideal for fine aggregate production.
Wear-Resistant Design: High-chromium alloy + tungsten carbide-coated roll shells (hardness HRC62), lifespan exceeding 2 years.
Reinforcement Handling Capability: Four-tooth roll structure processes demolition concrete containing rebar (feed size ≤600mm).

Applications:
Hard rock crushing (granite, pebbles, etc.), recycling demolition waste containing reinforced concrete.

3. Mobile Jaw Crusher (Primary Crushing)

Core Models:
PE Series: PE-150×250, PE-400×600, PE-900×1200, etc. (5–400 t/h)

Technical Features:
Deep-chamber crushing: Feed size ≤1000mm, adjustable discharge size 10–40mm, crushes hard rock with compressive strength ≤320MPa.
Mobile flexibility: Tire chassis enables rapid relocation, suitable for temporary sites.

Applications:
Mining primary crushing, river rock initial crushing.

4. Mobile Heavy Hammer Sand Maker (Construction Waste Processing)

Core Models:
1000×700 (60 m³/h)
Customized Mobile Stations (50–400 t/h)

Technical Features:
Integrated Production Line: Combines heavy hammer crushing, screening, and conveying into one unit, replacing multi-stage crushing with a single machine.
Rebar Separation: Semi-open discharge system automatically separates rebar to prevent blockages.
Dual Power Supply: Supports diesel/electric switching for off-grid operation.

Applications:
Recycled aggregate production from construction waste, limestone sand making.

Mobile Crushe

5. Mobile Construction Waste Crushing Station (Full-Process Treatment)

Core Models:
Customized units (20–700 tons/hour)

Technical Features:
Single-stage crushing replaces three-stage processes: Simplifies operations with adjustable output particle size (≤5mm for recycled bricks, 10–30mm for road base material).
Eco-friendly design: Dust emissions ≤10mg/m³, noise <85dB.

Applications:
On-site resource recovery of construction waste (producing recycled bricks and aggregates).

Key Parameter Comparison Table

Model Selection Recommendations

Wet sticky materials (e.g., coal gangue) → Mobile Double-Stage Crusher (SCF Series): Zero clogging risk, meets fineness requirements.
Reinforced demolition waste → Mobile Double-Tooth Roller Crusher (2PGY): Impact-resistant design, strong rebar separation capability.
Coarse crushing for large mines → Mobile Jaw Crusher (PE Series): Deep chamber for large hard rock processing.
Construction waste recycling → Mobile Impact Crusher: High integration, flexible dual-power (diesel/electric) operation.