What Should We Attention When Using a Four-roll Cru

Four-roll crusher is a new type of crushing equipment, four-roll crusher has simple structure, reliable performance for compressive strength less than 240Mpa, humidity less than 30% of the hard, medium and soft materials crushing or super crushing operations, for construction, chemical, refractory materials, metallurgical and other medium hardness materials, such as limestone, steel slag, coal and other materials in the broken, crushing operations. HSM technical staff to tell you what should attention when using the four-roll crusher?

1, The material size should not be too large, to be evenly into the crushing chamber, to avoid plug the feed port.
2, To strengthen the work of the iron removal of the feed. Non-crushed material (drill head and other objects) fall into the crushing chamber is easy to damage the roller, causing parking accidents, so in the crusher installed before the iron removal device to ensure that the material is no debris, does not affect the normal operation of machinery and equipment.
3, Four-roll crusher, should be timely to strengthen the mechanical equipment parts inspection, lubrication parts to regularly check the timely refueling to ensure that the equipment lubrication in a good state.
4, Four-roll crusher roller bearings are spring-tight, long time does not rub the spring will loose, a long time the bearing will be deformed, should be timely check the spring and oil.
5, Four-roll crusher crushing chamber, sticky material is easy to plug, should be shut down, and then deal with blocked. Here to pay special attention to, can not be in the machinery and equipment to carry out poking mine, prone to security incidents.
6, Four-roll crusher after the long-term use the roller surface wear a larger amount, will make the product size affected, to timely repair roll, then pay attention to adjust the discharge port or regular maintenance of machinery and equipment, To avoid the output of substandard products, affecting production efficiency.

HSM has a good pre-sale - on sale - after-sales service system, not only improve the efficiency of mineral processing, but also to reduce the cost of mineral processing. if you are interested in our company's machinery and equipment, welcome new and old customers to come to the consultation or send the inquiry to sales1@hsmmachinery.com