Precautions necessary to start Double Teeth Roll Crusher

Double teeth roll crusher is a very good crushing equipment, the advantages are more, the scope of application is also very wide, so the user is very much in the market to buy, but the excellent equipment, or need to pay more attention to a lot Aspects of the matter. Because the equipment is also need to care, if not pay attention, it will cause equipment failure, work efficiency and so on, for example, to start double teeth roller crusher, but also need to pay more attention to the following we come to understand the start double teeth Roller crusher to pay attention to what matters?

1, After checking the double teeth roller crusher and belt machine after the normal opening of the material before the belt machine, under the empty load on the double teeth roll crusher, running for three minutes or so, check the transmission system and other related parts are normal. If there is an abnormal situation, should immediately stop, identify the cause and eliminate, before restarting.
2, Check the motor steering, must meet the direction shown in the steering signs.
3, when the double Teeth roll crusher normal operation, start the feeding belt machine before feeding test. So that the load gradually increased from small, until the full load so far.
4, the feed must be evenly distributed in the full length of the roller, and regularly check the discharge port is blocked.

The above is the double-roll crusher to start to pay attention to the problem, we must strictly abide by, so as to avoid the machine failure and so on. If you have any questions you want to know, you can call our contact phone, our technical staff will be detailed for you to answer.Also you can send e-mail to me :sales13@hsmmachinery.com