Four roller crusher operation precautions

Today's four-roll crusher in the market getting better and better, the major industries have begun to pay attention to it. We all know that both the roller crusher and the four-roll crusher, most of the basic operation are the same, four-roll crusher only on the basis of the original more than two rollers, it is obvious in the attention of the roller Crusher or roller crusher is much more complicated. So what do you know when operating four-roll crusher should pay attention to what aspects? HSM mechanical engineer to tell you!

Through the four-roller crusher understanding and understanding, in operation we should note the following:1, the material block should not be too much, to be evenly into the cabin, to avoid the beginning of the break, the mouth on the blockage!

1, a stick bearing is pressed by the spring, the time is too long do not rub the oil spring will loose, a long time the bearing will be deformed, it should be timely to the spring oil.
2, to strengthen the mine to the iron work. Non-crushed material (drill bit and other objects) fall into the roller will damage the crusher, resulting in a parking accident. So in the crusher should be installed before the iron removal device (generally machinery and equipment have this device).
3, crushing cavity, the sticky material is easy to plug the broken space, in the process of blocking the fault should be parking treatment, not in the operation of poking mine, should pay special attention to .
4, crusher running for a long time, due to the large wear on the roll surface, will cause the product size is too small, then pay attention to adjust the discharge port or equipment maintenance, to avoid production of substandard products, so that the crusher damage.
5, because it is mechanical equipment, should promptly strengthen the crusher parts of the inspection, the lubrication of the crusher parts to refuel on time to maintain a good lubrication of the equipment state.If you want more about our product .you can e-mail me:sales13@hsmmachinery.com