How to solve the Trommel screen mesh blockage

In this hot season, HSM Trommel sieve sales are very good, how to maintain the life of the Trommel sieve length of use, but also our company is very concerned about the problem. Trommel is a kind of mineral processing equipment which is classified according to the particle size of the material. It is also known as Trommel screening machine. It is widely used in mining, building materials, transportation, energy, chemical and other industries. Commonly used in the fine grained material grading to improve the quality of the material. As the trommel screen has many advantages, such as the use of block eccentric as the exciting force, exciting force. High-frequency, large-angle structure, so that the machine screening efficiency is high, the maximum treatment, the use of high-strength bolts, the structure is simple, easy to repair; , Long life, low power consumption, low noise. And so on, so in the daily industry, mining and other production is very common.

But once the trommel screen appears plugging phenomenon how do we solve it? Sometimes by adding a mechanism in the fixed frame, and then by the rotation of the body to drive the belt above it constantly rapping the surface of the sieve, in order to draw the plug in the sieve inside the raw material particles, this method in practice There is a disadvantage that there will be more dust. Another method is to use the impact of the impact of the block, this method requires a large enough to support the ring sleeve wall thickness, so that it can withstand the block in the block when the removal of raw material particles The third method: the use of water washed away the way to plug the impurities in the screen. Can be installed in the top of the trommel screen with a number of small holes in the stainless steel pipe, the use of water flow to plug the impurities of the screen to rush.