Installation and Debugging Skills of Roll Crusher

Roll crusher as a more common crusher equipment, has many years of production history, many companies have produced, HSM as a professional manufacturer of crusher, the choice of leading skills and sandstone detailed understanding of the mining situation in the The new roller crusher produced in the domestic market has new production skills and special structural design.

As for the commissioning, despite the adjustment and testing of the roller mills, there are possibilities for problems in the process of being handed over and installed, and there is still a need for simple commissioning before production to prevent the safety of production progress. Now, let's share some tips for safe debugging of roller crusher equipment for our customers.

Installation and debugging skills of roll crusher

1, Check the engine wiring and voltage (normal voltage of 380V).
2, Check whether the smooth tubing convergence, refueling test run again before the confirmation.
3, Check  the connection between the components is stable and solid, careful to see if there is a foreign body, if any, it must be immediately eliminated.
4, Before the installation of belt should launch the electric motors, rolling should be in accordance with the direction of the crusher (from the inlet to see, counterclockwise rotation of the impeller) rotation. If it is in the opposite direction of rotation, the motor wiring should be adjusted so that in the same direction rolling, the opposite direction of rotation is not allowed.5, on the electric motor and dual drive, the spindle and the motor on both sides of the convergence of the main axis through the use of special rope equivalent, coiling tension on both sides of the rope should be adjusted to the level.